{"id":1224,"date":"2022-03-31T17:07:56","date_gmt":"2022-03-31T08:07:56","guid":{"rendered":"http:\/\/www.kobakin.co.jp\/kobakin_wp\/?page_id=1224"},"modified":"2022-04-19T15:08:34","modified_gmt":"2022-04-19T06:08:34","slug":"flow","status":"publish","type":"page","link":"https:\/\/www.kobakin.co.jp\/en\/flow\/","title":{"rendered":"Manufacturing Flow"},"content":{"rendered":"\n
<\/span>
\n

Manufacturing Flow<\/strong><\/h2>\n\n\n\n
\n
\n

Drawing Review<\/h4>\n\n\n\n

From customer\u2019s outline of product requirement, we will make proposals from the product design stage based on the application and specification of the parts.<\/p>\n<\/div>

STEP<\/div>
1<\/div><\/div><\/div>\n\n\n\n
\n

Technical Review<\/h4>\n\n\n\n

Layout of the production process shall be considered in accordance with the requested quantity. We also offer low-cost support for prototype production.<\/p>\n<\/div>

STEP<\/div>
2<\/div><\/div><\/div>\n\n\n\n
\n

Tooling Design and Fabrication<\/h4>\n\n\n\n

Tooling design and fabrication shall be done in the most efficient way according to the layout of the production process.<\/p>\n<\/div>

STEP<\/div>
3<\/div><\/div><\/div>\n\n\n\n
\n

Material Sourcing<\/h4>\n\n\n\n

Material can be proposed upon customer\u2019s request.<\/p>\n<\/div>

STEP<\/div>
4<\/div><\/div><\/div>\n\n\n\n
\n

Press Stamping<\/h4>\n\n\n\n

We have the facilities to carry out stamping, either progressive or single action, according to the required quantity.<\/p>\n<\/div>

STEP<\/div>
5<\/div><\/div><\/div>\n\n\n\n
\n

Secondary Process<\/h4>\n\n\n\n

In addition to cutting and degreasing cleaning, secondary processes are available in-house.
We also have a network of suppliers and sub-contractors with various technologies related to metal processing such as
surface treatment. Please contact us for any processing method.<\/p>\n<\/div>

STEP<\/div>
6<\/div><\/div><\/div>\n\n\n\n
\n

Inspection<\/h4>\n\n\n\n

All possible measures are taken to ensure quality products. During production, self-inspection and confirmation are carried out using various measuring equipment, optical equipment, gauges, visual inspection, etc., and recorded in check sheets for traceability.
The Quality Assurance\/QA Department will carry out primary inspection for tooling buy-off and QC patrol conducts
the in-line and in-process inspection during mass production. As outgoing prior to shipment, QA will carry out the final
inspection for all products, and the inspection report (CoC) will be attached with shipment to customer.<\/p>\n<\/div>

STEP<\/div>
7<\/div><\/div><\/div>\n<\/div>\n<\/div><\/div><\/div>